ST 200 SHOPMASTER MILL-TURN WITH 4 AXIS CNC AND MACH 3 LICENSE View larger

ST 1 SHOPMASTER MILL-TURN

ST 1

New product

 SHOPMASTER MILL-TURN  

SPECIAL OFFER- SAVE OVER 700.00
PAY BY CHECK AND GET 5% DISCOUNT
PLUS GET FREE FREIGHT*
And 1 year return policy

* TO TRUCK TERMINAL in lower 48 states. Alaska, Hawaii and international pleas ask for quote 

Click the  quote button for full details

GET QUOTE

FINANCING YOUR TURNADO (PERSONAL APPLICATION)

FINANCING YOUR TURNADO ( BUSINESS APPLICATION)

More details

$6,495.00

Add to wishlist

Customer ratings and reviews

(4,4/5)
7 rating(s) - 7 review(s)
View distribution
  • This is our turnkey machine fully assembled and tested at our factory. All CNC components are installed and the machine is equipped with a Computer with Mach 3 software installed and configured for the machine. Only a few hours required to uncrate the machine, assemble the bench and you will be writing CNC programs.

    COMES COMPLETE WITH VARIABLE FREQUENCY DRIVES

    Efficient system converts your single phase
    household 220 volts to industrial 3 Phase output.


    NOW WITH 2 HORSEPOWER MOTORS! 4 AXIS STEPPER DRIVE CNC WITH FREEWARE MACH III SOFTWARE

    PC is pre-configured with MACH III

    specifically for the MILL TURN.

    Mouse, Keyboard, Monitor and power cable included.

    3 AXIS C-7 MULTI-TRACK BALL SCREWS POWDER COATED SHEET METAL

    Plus huge tooling package!

    It’s a complete home machine shop

    17 X 30 CNC LATHE and
    12 X 30 CNC MILL

    All in 1 compact package.

    LATHE-MILL COMBO

    TABLE SIZE19 X 9.5”
    X TRAVEL17”
    SPINDLER-8
    SPEED0-4750
    HORSEPOWER2
    WEIGHT1250#
    CONTROLSGECKO+MACH 3

    GENERAL DIMENSIONS AND LATHE SPECIFICATIONS

    LENGTH54 “
    WIDTH31″
    HEIGHT82″ + - 1″ FOR LEG LEVELERS
    SHIPPING WEIGHT1250 #
    MACHINE WEIGHT1150 # INCLUDES BENCH
    CRATE SIZE54″W x 32″D x 43″H
    FOOTPRINT54″ WIDE X 32″DEEP X 84" TALL (ADD 24" WIDE FOR PC)
    T SLOT SIZE1/2″
    POWER FEED X AXISYES forward and reverse with cnc or Power feed
    POWER FEED Y AXISYES forward and reverse with cnc or Power feed
    POWER FEED Z AXISYES up and down with cnc or Power feed
    TABLE SIZE9″ X 19″
    T SLOTS ON TABLE 3FULL LENGTH EQUALLY SPACED
    DISTANCE BETWEEN CENTERS30″
    DIAL CALIBRATION ON CROSSFEEDDRO STANDARD
    DIAL CALIBRATION ON LEADSCREWDRO STANDARD
    DIAL CALIBRATION ON Z AXISDRO STANDARD
    FEED RATES ON X AXISADJUSTABLE 0-60 IPM UNDER CNC or Power feed
    FEED RATE ON Y AXISADJUSTABLE 0-60 IPM UNDER CNC or Power feed
    FEED RATE ON Z AXISADJUSTABLE 0-40 IPM UNDER CNC or Power feed
    HEADSTOCK TAPERMORSE # 5
    LATHE CHUCK BORE1.59"
    LATHE CHUCK DIAMETER6″
    LATHE CHUCK MAX WORK PIECE DIA.6.32″
    LATHE CHUCK MINIMUM WORKPIECE0.125″ ( practical limit)
    LATHE CHUCK MOUNTPLAIN BACK
    LATHE CHUCK TYPE3 JAW SELF CENTERING
    SPINDLE ACCURACY T.I.R.0.00076″
    SPINDLE BORE1.59"
    SPINDLE SPEEDS0-1600
    SWING OVER BED17″
    SWING OVER CARRIAGE7.5″
    TAILSTOCK TAPERMORSE # 3
    TAILSTOCK BARREL TRAVEL6.25″ PLUS 4" TELESCOPING
    THREADS – INCHINFINITE
    THREADS- METRICINFINITE
    Y AXIS TRAVEL10″
    TOOL BIT SIZE0.125″ TO 0.50″
    X AXIS TRAVEL WITH TAILSTOCK ON16.5″
    X AXIS TRAVEL WITH TAILSTOCK OFF16.5″
    OPTIONAL STEADY REST2.5″ MAX DIAMETER
    OPTIONAL FOLLOW REST1.5″ MAX DIAMETER

    MILL SPECIFICATIONS

    SUPPORT COLUMNS - 6 1.00″ GROUND6.00″ TOTAL DIAMETER
    MILL HEAD TRAVELS ON LINEAR BEARINGS
    DRAWBAR 7/16-20 THREADS8.0″ WITH SPINDLE CENTERING BUSHING
    DRILL CHUCK0-1/2″
    DRILL CHUCK ARBORS 2R-8 AND MORSE # 3
    FEED RATES MILL X AXISADJUSTABLE 0-60 IPM UNDER CNC or Power feed
    FEED RATE MILL Y AXISADJUSTABLE 0-60 IPM UNDER CNC or Power feed
    FEED RATE MILL/DRILL Z AXISADJUSTABLE 0-40 IPM UNDER CNC or power feed
    MILL HEAD SPINDLE TO LATHE SPINDLE TRAM0.001″
    Z AXIS TRAVEL10.5"
    TTS STYLE TOOL HOLDER WITH 2 ER20 COLLETS
    SPINDLE CENTER TO FRONT OF LATHE CHUCK12″
    SPINDLE CENTER TO LATHE SPINDLE FLANGE14.75"
    SPINDLE CENTER TO SUPPORT COLUMN16.5″
    SPINDLE TO TABLE DISTANCE2'-15"
    SPINDLE SPEEDS0-4750
    SPINDLE TAPERR-8
    TOOL SIZE LIMITS ( END MILLS/DRILL)1″ recommended
    X AXIS TRAVEL16.5″ (8.25″ right and left from center)
    Y AXIS TRAVEL10″ (5″ forward and back from center)

    ELECTRICAL

    MOTORS (2) 220 VOLT 60 HZ TEFC6.3 AMPS EACH 4 POLE INVERTER DUTY
    HORSEPOWER2 rated at max VFD torque compensation
    PHASETHREE
    POWER CORDS1 12 GUAGE
    POWER REQUIREMENT 220 VOLTHOUSEHOLD OUTLET 20 AMP CIRCUIT
    MOTOR MOUNTING FRAMEIEC 100 face mount
    MOTOR SHAFT SIZE24 mm ( 15/16″)
    MOTOR RPM1400 @ 60Hz adjustable through VFD to 120 Hz=2800 
    INVERTER 220 VOLT SINGLE PHASE INPUT 220 VOLT 3 PHASE OUTPUT

    OTHER

    BENCH- ALL STEEL WELDED CONSTRUCTION6 LEGS WITH ADJUSTABLE LEVELING PADS AND 4 CASTERS FOR MOVING BUILT IN DRIP TRAY FOR COOLANT SYSTEM
    DRO MOUNTINGALL POINTS DRILLED AND TAPPED, SHIELDS AND HARDWARE ON MACHINE  AND COLOR MATCHED- DRO FULLY MOUNTED AT FACTORY
    CNC MOUNTING AND HARDWARECNC FULLY INSTALLED AT FACTORY INCLUDING X, Y, Z AND A AXES ( A AXIS OUTPUT FOR THE OPTIONAL CNC ROTARY TABLE)
    CNC ENCLOSUREALL STEEL SHEET METAL HOUSING INTEGRATED INTO THE MACHINE DESIGN. GECKO DRIVE , RS 232 CONNECTIONS AND COOLING FAN INSTALLED IN USA SWING AWAY COMPUTER AND MONITOR MOUNT
    BALL SCREWSC-7 BALL SCREWS WITH DOUBLE MULTI TRACK DEFLECTOR NUTS INSTALLED AT FACTORY ON X, Y AND Z AXES.
    HAND WHEELS X, Y, ZROUND WITH FOLD AWAY HANDLES FOR CNC PROGRAM RUNNING 
    MACHINE FASTENERSSTEEL
    MOTIONSALL SPINDLES RUN ON ANGULAR CONTACT SEALED BALL BEARINGS, MOTORS RUN ON SEALED BALL BEARINGS.



  • By on 16 Aug. 2017 (ST 1 SHOPMASTER MILL-TURN) :
    (4/5

    Fast delivery

    Ordered on Monday and truck showed up Thursday.

     Report abuse
    By on 12 June 2017 (ST 1 SHOPMASTER MILL-TURN) :
    (4/5

    Easy setup

    All I had to do was plug it in to the wall and turn it on- The mach 3 was ready to run.

     Report abuse
    By on 22 May 2017 (ST 1 SHOPMASTER MILL-TURN) :
    (4/5

    Uses standard tooling

    The mill spindle is R-8, so all the tooling from my old Bridgeport works on this machine.

     Report abuse

Customers who bought this product also bought: